Fu Sheng 15-37 kw

[Home] [Air Compressor] [Air Dryer] [Air Oil Seperator] [Air Filters] [Silvent Air Nozzle] [Compressor Oil] [Air Booster] [Exair Compressed Air Products]

Home
Up

SA SERIES 15-37 KW

Third Generation Screw Air End Profile
Asymmetrical, 5 lobe 6 flute rotor profile, machined to highest accuracy ensures reduced differential pressure between flutes and lobes, and lowest possible back flow. Adiabatic efficiency is increased by 10-12%, which translates into 25% energy saving, as compared to the 4-6 rotor profile design.

High Precision Machining Equipment
Most advanced, highly specialized precision machining and control equipment enables rotors machining / grinding accuracy down to 0.002mm, with roughness allowance of 0.1 - 0.2 um.

Outstanding Design
Large in size, slow running rpm Fu Sheng screw air-ends are more efficient and deliver more compressed air for the same driving power. Bearing design life of 50,000 hours can be assured with air-ends min. vibrations and bending stress.

Air-end Rotor Profile Patent

EASY OPERATING

Microchip control unit not only optimizes performance, monitors parameters of compressor unit but also has protection, function which enables machines to operate 24 hours daily with no human presence required.

Interlock control and remote control function.

Simple and informative control panel design makes operating readings clear and maintenance convenient and easy.

Prolong unload condition auto stop/auto start for efficient power consumption saving.

	Intelligent Control System Effective operational control is crucial for smooth, reduced cost operation. Fu Sheng SA series compressors are equipped with intelligent, microchip control units that are simple and user friendly designed. Control system optimizes performance and monitors parameters of compressor unit.
	Cooling System Highly efficient, low noise electrical fan for most effective cooling result
	Oil Receiver Enlarged oil receiver with special internal design enables constant air flow and effective oil separation.
	Oil Filter/Thermostatic Valve Combination of "2 in 1" unit enables easy and convenient maintenance.
	Oil filter Filter unit combining economy and environmental friendliness with high functionality and efficiency. Protecting complete compression system, easy servicing and high level of reliability and environment protection are the key concepts.
	Oil fine separator Micro-glass fiber layers separation process is effective down to sub micron range. The residual of the compressed air is controlled within 3 mg/m³ (3 ppm).
	Anti-vibration Effective reduction of operating vibrations and prevention of the low frequency noise transmission is achieved with anti-vibration pads.

Specifications

Model		SA15A	SA18A	SA22A	SA30A	SA37A
Air-end Model		SA-2	SA-2	SA-2	SA-3	SA-3
Working pressure	kg/cm²G	7	7	7	7	7
Air delivery	m³/min	2.5	3.1	3.7	5.2	6.5
Air-end speed	RPM	2870	3410	3970	3165	3870
Discharge air temperature	ºC	Environment Temperature + 15°C
Lubricant	liter	20			23
Power	kw	15	18.5	22	30	37
Speed	rpm	1450 / 1750
Starting method		Y - ∆
Voltage	Volt	220 / 380 / 440
Frequency	Hz	50 / 60
Length	mm	850			1000
Width	mm	1130			1330
Height	mm	1300			1485
Weight	kg	560	580	620	980	1020
Outlet pipe	inch	1"			1½"

Please contact us today for further discussion email:
jontye1@streamyx.com

Sophotech (M) Sdn Bhd (408422T)
25 Jalan PM1, Taman Perindustrian Merdeka, 75350 Melaka, West Malaysia
Telephone: ++ 606-3178126, Fax: ++ 606-3177431
H/P: 012-6821455

Cooling System Highly efficient, low noise electrical fan for most effective cooling result

Oil Receiver Enlarged oil receiver with special internal design enables constant air flow and effective oil separation.

Oil Filter/Thermostatic Valve Combination of "2 in 1" unit enables easy and convenient maintenance.

Oil filter Filter unit combining economy and environmental friendliness with high functionality and efficiency. Protecting complete compression system, easy servicing and high level of reliability and environment protection are the key concepts.

Oil fine separator Micro-glass fiber layers separation process is effective down to sub micron range. The residual of the compressed air is controlled within 3 mg/m³ (3 ppm).

Specifications

Cooling System
Highly efficient, low noise electrical fan for most effective cooling result

Oil Receiver
Enlarged oil receiver with special internal design enables constant air flow and effective oil separation.

Oil Filter/Thermostatic Valve
Combination of "2 in 1" unit enables easy and convenient maintenance.

Oil filter
Filter unit combining economy and environmental friendliness with high functionality and efficiency. Protecting complete compression system, easy servicing and high level of reliability and environment protection are the key concepts.

Oil fine separator
Micro-glass fiber layers separation process is effective down to sub micron range. The residual of the compressed air is controlled within 3 mg/m³ (3 ppm).